99久久精品无码一区二区毛片|日日噜噜夜夜狠狠久久丁香五月|亚洲精品国产成人片在线观看|国产欧美另类久久久精品丝瓜

News Center

Location: Home >News Center

News Center

Recommend

Contact Us

Jiangsu Xinhantong Intelligent Electrical Technology Co., Ltd

Tel: 0511-80303080

Fax: 0511-80303081

Address: No.1 Chaoyang North Road, Chengbei Science and Technology Industrial Park, Sanmao Street, Yangzhong City

Bridge construction matters

2023-10-09
780次

1、 Construction

Measurement and positioning → Support and hanger manufacturing device → Bridge device → Grounding treatment

2、 Construction methods and skill methods

(1) Measurement and positioning: Use the line snapping method to mark the equipment position of the bridge, determine the fixed position of the bracket, and mark it correctly. Composite cable tray is the second generation product in the cable tray series and a new type of cable tray. It is suitable for laying various projects, units, and cables. It has the characteristics of simple structure, flexible configuration, convenient installation, and novel form. The positioning of the bridge in the vertical shaft should first use the suspension line method to determine the device reference line. If the reserved hole is not suitable, it should be adjusted and repaired in real time.

(2) Bracket manufacturing device

(3) According to the construction drawing design elevation and bridge specifications, locate and manufacture the bracket based on the measured dimensions. These brackets are produced in the factory. All components of the cable tray need to be galvanized and installed on the outdoor tray outside the building. The full name of a rigid structural system, including straight sections, elbows, tees, groove types, tray or stepped cross sections, as well as support arms, hangers, etc., which have tightly connected support cables. Slot type cable tray, also known as slot type cable tray, is a fully enclosed cable tray suitable for laying computer cables, communication cables, thermocouple cables, and other control cables for high sensitivity systems. It has good effects on shielding control cables from interference and protecting cables in highly corrosive environments. There is no ceiling beam bottom lifting or wall support device, but there is a ceiling internal lifting or wall support device. In public places without suspended ceiling, connect structural members, and take into account the beauty and convenience of construction and maintenance, use wall or column support devices or install them on the bottom chord members of Truss roof. The bracket of the wall mounted device is fixed with expansion bolts, and the spacing between the brackets does not exceed 2 meters. Supports and hangers should be added at the intersection of straight and non straight sections, at the deformation joints of buildings, and in the middle of non straight sections with a bending radius greater than 300mm. The support and hanger device should ensure that the degree or verticality of the bridge meets the requirements.

(4) Bridging device

① Regarding the extraordinary appearance of the bridge, the dimensions measured on-site will be handed over to the means supplier, who will manufacture based on the dimensions and reduce on-site processing. The material, model, thickness, and accessories of the bridge meet the design requirements.

② Before installing the bridge, it is necessary to coordinate with various specialties to prevent conflicts between large diameter fire pipes, sprinkler pipes, hot and cold water pipes, drainage pipes, as well as air conditioning and exhaust equipment.

③ Lift the bridge to the predetermined position and secure it to the bracket with bolts. Carefully check the dimensions at the turn. The slope of this bridge should be the same as the slope of the building. For bridges on curved building walls, the curved shape should be consistent with the building. The bridge is connected to the bridge through a connecting plate, and the connecting bolt is a half round head bolt, which is located on the inner side of the bridge. The cracks between cable trays must meet the design requirements to ensure that the cable trays of the system are integrated.

④ Bridges crossing deformation joints in buildings should be treated as expansion joints in accordance with the enterprise standard "Special Steel Cable Tray Installation Technology". When the straight section of the steel bridge exceeds 30m, a thermal expansion compensation device should be installed.

⑤ The bridge device is horizontal and vertical, with a uniform and beautiful appearance


contact us

Jiangsu Xinhantong Intelligent Electrical Technology Co., Ltd

Tel: 0511-80303080

Fax: 0511-80303081

Address: No.1 Chaoyang North Road, Chengbei Science and Technology Industrial Park, Sanmao Street, Yangzhong City

自拍偷在线精品自拍偷无码专区| 国产综合精品| 亚洲中文字幕无码久久| 邻居少妇张开腿让我爽了在线观看 | 特黄aaaaaaaaa毛片免费视频| 国产精品卡一卡二卡三| 人人玩精品人妻少妇性色| 激情综合丁香五月| 久久久久人妻精品一区 | 三级三级一区二区三区| 啊轻点内射在线视频| 国产成人剧情av在线| 久久久国产99久久国产久麻豆| 国产精品久久久久aaaa| 亚洲精品喷潮一区二区三区| 国精品人妻无码一区二区三区性色 | 亚洲精品成人区在线观看| 黄片一区视频在线免费观看 | 国产精品久久久久久久久久红粉| 亚洲熟妇无码乱子av电影| 欧美日韩中文国产一区发布| 免费观看交性大片| 欧美真人性野外做爰| 成在人线无码aⅴ免费视频| 麻豆乱码国产一区二区三区| 精品无码久久久久久久久| 无码专区aaaaaa免费视频| 亚洲av永久无无码精品一区二区三区| 日本亲近相奷中文字幕| 亚洲av中文无码字幕色最| 亚洲av日韩综合一区在线观看| 青青小草av一区二区三区| 日本免费一本天堂在线| yyyy11111少妇无码影院| 天天爽天天爽夜夜爽毛片| 国产亚洲av综合三区| 欧美高清性色生活片| 亚洲男同志网站| 免费看撕开奶罩揉吮奶头视频| 人人玩人人添人人澡欧美| av蓝导航精品导航|